When LED lamps entered the market at €7 each, many people wondered why they should replace their incandescent bulbs, which only cost a Euro. So, why has the LED lamp completely taken over today while the manufacturing of incandescent bulbs has ceased?
The incandescent bulb may have been inexpensive, but it had a short burn time of only 1,000 hours and used a lot of energy. The LED lamp, on the other hand, could illuminate for 15,000 hours and used a fraction of the energy. Calculated on 15,000 hours, the total cost of 15 incandescent bulbs was more than €70, while a single LED lamp during the same period cost just over €12. The choice was quite obvious, right? However, the same mindset is not always given with regard to the purchase of significantly larger products, which use considerably more energy.
With total costs and environmental impact in mind
Every day, municipalities, regional authorities, businesses and others procure enormous amounts of products that use energy. Historically, procurement processes have focused on obtaining the lowest possible purchase price in the belief that this represents the best investment. With time, the mindset has altered and it has become increasingly common to look at the life-cycle cost (LCC) of a product when deciding which products to buy.
Making a decision based on LCC is smarter than prioritising a low purchase price, in terms of both finances and environmental impact. A product that consumes energy, an air handling unit for example, costs money to operate. And it has a long service life, often in excess of 20 years. A unit that consumes less energy will cost significantly less to run. This is part of the model used to calculate a product’s life-cycle cost.
In addition to operating costs, the cost of servicing, maintenance, spare parts, environmental impact and even the decommissioning of the product need to be taken into account. These costs can account for as much as 90 % of the lifetime cost. Another bonus effect of buying a more energy efficient product is that it increases property value.
The iceberg principle makes it easy to understand the life-cycle cost of a product. Sometimes, the purchase represents as little as 10 % of the total cost of the product, while the remainder consists, among others, of operations and maintenance.
How to make an LCC calculation for an air handling unit
There are different models for calculating a product's life-cycle cost depending on which product or industry you are dealing with. When it comes to air handling units, we use the LCCE model, where we calculate the investment and energy cost.
LCC =
Investment + Total energy cost
In the example below you can see how an air handling unit with a higher procurement cost can still be the most cost-effective option, seen over a usage time of 20 years. In addition, Air handling unit 1 may have a lower maintenance and environmental cost, which further strengthens the LCC calculation.
| Air handling unit 1 | Air handling unit 2 | |
|---|---|---|
| Investment | €19,000 | €16,500 |
| Total energy cost* | €28,500 | €48,700 |
| Life-cycle cost | €47,500 | €65,200 |
*The calculation is based on half-day operation. For full day operation the energy cost would have been higher and the difference in life-cycle cost even greater.
In our product selection program IV Produkt Designer, you can easily calculate the life-cycle cost of energy (LCCE) for an air handling unit, thus finding the best investment.
The calculation takes into account the investment cost and energy cost, but you can also add manual entries, such as maintenance.
Air handling with focus on LCC
Focus on life-cycle cost is very close to our heart. Considering how much an LCC calculation affects the total cost of an air handling unit and its environmental impact, we believe having this focus is self-evident.
Others also read
Intervent talk AHU news at the Nordbygg tradeshow...
Join Ville from Intervent – our Finnish representative – as he guides us through our latest innovations...
The most profitable sustainability investment
When it comes to energy efficiency, discussions often lead to replacing windows, replacing lights or additional ...
Intervent talk AHU news at the Nordbygg tradeshow...
Join Ville from Intervent – our Finnish representative – as he guides us through our latest innovations...
Calculate energy savings and payback before replac...
An older ventilation unit that appears to be in good condition may be unexpectedly profitable to replace. It is ...
